Outdoor Simple Cabinet

Shushi outdoor simple cabinets are designed for temporary outdoor exhibitions, tours, pop-up events and other scenarios to hold LED screens, advertising light boxes and other equipment. Built with lightweight aluminum alloy frames and waterproof & dustproof surfaces, they can withstand light rain and humid environments. Foldable storage casters are installed at the bottom; the cabinet is only 15 cm thick when folded for transportation and can be stacked compactly. Built-in buffer card slots fit 32–65 inch display screens, supporting horizontal splicing and vertical stacking to meet demands of fast outdoor assembly, flexible movement and reliable protection.

Technical Parameters

Material & Structural Features

The main cabinet body adopts weather-resistant galvanized plates with outdoor special anti-oxidation coating, resisting long-term sun and rain without rusting, fading or cracking. It adopts a simple assembly structure with few components and low assembly difficulty, and passivated corners to prevent collision damage.

The cabinet top is designed with inclined water diversion, louvered vents on the sides, built-in simple equipment fixing seats, and reserved wire outlets at the bottom for neat wiring and effective rain backflow prevention.

Product Advantages

5-minute quick assembly, no tools required

Three-step installation process:

Total: 5 mins, operable by a single person

Comparison with Traditional Solutions

Traditional truss + waterproof covering: 2 workers, 2 hours

This product: 24 times higher assembly efficiency

Lightweight & weather-resistant for outdoor use

Composite structure of aluminum alloy and engineering plastic, UV-resistant, resistant to high and low temperatures, with surface waterproof coating for light rain resistance.

Compact folding design for cost-effective logistics

The cabinet can be fully folded to only 15 cm thick; 6–8 sets can be loaded into the trunk of one SUV, greatly cutting transportation costs.

High compatibility & flexible expansion

The standard version fits common 32-inch, 43-inch, 55-inch display screens or light box panels, supporting horizontal splicing or vertical stacking for expansion.

Safety protection to reduce equipment damage

Anti-collision rubber blocks are installed at four corners, with soft buffer lining inside the cabinet to avoid screen damage caused by vibration or collision during transportation.

Reusable with low maintenance cost

All connecting pieces adopt standard specifications, and vulnerable parts can be replaced separately. The overall service life exceeds 5 years.

Outdoor Simplified Installation Steps

1.Unfold the folded cabinet and lock the four-side frames in place.

2.Install optional bottom caster modules, or place the cabinet directly on flat ground.

3.Insert the display screen or advertising panel into the card slots and fasten four corner fixingclamps.

4.For wind resistance, drive ground nails or bind tension ropes through reserved holes.

5.Connect power and signal cables (cables can be routed out from the bottom or sides).

6.Inspect overall stability before putting into service.

Disassembly & Storage Steps

1.Disconnect power and signal cables

2.Take out the display screen/equipment

3.Unlock the four-side frames and fold back to original state

4.Stack flatly for storage

Disassembly time: approx. 3 minutes

Application Scenarios

Commercial Advertising Displays

Widely used in commercial plazas, shopping malls, street shops and outdoor billboards for brand promotion, product marketing and advertising release.

Urban Landmarks & Outdoor Media

Suitable for city squares, pedestrian streets, landmark building exteriors and other locations to deliver high-brightness outdoor LED display solutions.

Stadiums

Applicable to sports stadiums, sports centers and event venues for displaying match information, advertisements and live broadcast footage.

Transportation Hubs

Used in airports, railway stations, bus terminals, subway stations and other transport sites for information release, advertising and navigation display.

Cultural & Tourism Scenic Spots

Commonly deployed in tourist attractions, parks, theme parks and cultural squares for event promotion, scenic navigation and information display.

Government & Public Projects

Fit for smart city construction, municipal squares and public service centers to meet demands of information release and public publicity.

Enterprise Parks & Factories

Installed on exteriors of corporate parks, factories and office building entrances for corporate image display, notice announcement and publicity.

Outdoor Activities & Stage Performances

Suitable for concerts, exhibitions, celebrations and temporary stage construction to deliver clear and stable visual effects for on-site audiences.

Why Choose Our Outdoor Simple Cabinet?

FAQ

Q1: Can custom sizes be supported?

A: Yes. Small-batch customization is available according to your screen size, hole position, color and other requirements.

Q2: Can the cabinets be stacked during transportation?

A: Yes. Only 15 cm thick after folding, multiple cabinets can be stacked flat to save shipping space.

Q3: Can this cabinet be placed outdoors permanently?

A: Made of outdoor weather-resistant materials and waterproof structures, it can be placed outdoors long-term and adapt to normal outdoor climate conditions.

Q4: Will the internal temperature of the outdoor simple cabinet get too high?

A: Standard louver vents enable smooth air circulation for timely heat dissipation and prevent equipment shutdown due to overheating.

Selection Guide

Step 1: Confirm Usage Scenarios

Step 2: Confirm Screen Size

Step 3: Confirm Protection Rating